Cart X

Totale: 0,00€ Go to cart
Brembo Racing right caliper GP4-RS monoblock 108mm wheelbase GR4RS with pads

Brembo Racing right caliper GP4-RS monoblock 108mm wheelbase GR4RS with pads

Code: 220C78310-dx

455,21€ -21.57% SAVINGS 98,21€
357,00€ VAT PRICE & Free shipping to Italy
or 3 installments of 119 € without interest Pay with ScalapayInfo su Scalapay
Available in 4-8 working days
* delivery times are variable and depend on the availability of the goods and the delivery time of the courier.
ASK FOR INFO
*Non-EU customers, do not pay VAT. (you will pay the VAT in your own country upon receipt of the goods in accordance with local taxation)

BREMBO GP4-RS RIGHT CALIPER WITH PADS,

GP4RS THE DOMINANT CALIPER ON RACETRACKS

ATTENTION, THE CALIPER IS SOLD WITHOUT A BOX AND CARD

 

​How well do your standard-issue brake calipers perform when pushed to the limit on the racetrack? Are you looking for better performance but still facing the issue of finding a solution with an optimal price to performance ratio? 

The new Brembo GP4-RS One-Piece caliper is the answer you've been waiting for. Designed for racing enthusiasts and for those who want real innovation for their bike's brake calipers, the Brembo GP4-RS was inspired by the one-piece caliper developed for the MotoGP and now available to enthusiasts everywhere.

The new Brembo GP4-RS One-Piece caliper, presented at EICMA 2016, completes the range of Brembo calipers designed for the racetrack. It stands with the GP4-RR and GP4-RX, both of which are billet machined and an absolute gold standard for performance. 

So, if you have a sport bike with a 108 mm inter-axle and visit the racetrack often, there's no more excuses for putting off the upgrade. Not convinced yet? Here's 7 good reasons to upgrade.

1) Lightweight

The GP4-RS one-piece caliper was created using a very complex foundry technique exclusive to Brembo. The result is a caliper that is 10% lighter than the renowned M4 One-Piece, a long-standing champion thanks to such characteristics as rigidity, lightness and accuracy.

 

2) Cooling

The fins around the pistons are derived from MotoGP systems: these fins allow for efficient heat dissipation when braking. The surface area of the fins exposed to the air is 30% greater compared to calipers without fins. That's no small difference given that this section is subject to significant thermal stress and is located near the brake fluid.

3) Stiffness

​The ribbing on the front section of the pistons was also derived from the MotoGP. Such machining helps protect the caliper from deformations caused by significant braking. The end result is that the system functions with greater accuracy when braking intensely.

 

4) Unique patents

The fins near the pistons are a characteristic feature of these calipers and are protected by a design model. Thanks to the GP4-RS, you can equip your bike with a solution developed for MotoGP calipers and now available for the first time ever in an upgrade product.

 

5) Price

The new GP4-RS offers a price to performance ratio specifically suited to those who take their bikes to the racetrack for non-competitive racing. The product was designed and made for those who love speeding through the racetrack and braking at the last minute but who also keep an eye on the cost-benefit ratio.

 

6) Brake pads

The kit for the GP4-RS calipers includes Brembo sintered brake pads designed for mixed use on the road and racetrack. A solution that makes GP4-RS calipers immediately effective on the road as well. For those who want maximum performance, however, GP4-RS calipers are compatible with Brembo Racing Z04 brake pads, a full blown "Factory Pad" used in the Superbike and SuperSport World Championships.

7) Adhesive temperature strips

The kit for the GP4-RS One-Piece calipers includes the same adhesive temperature strips used to measure temperatures after each MotoGP session. By placing the adhesive on your GP4-RS caliper you can measure the temperature reached and witness the improved cooling first hand.

 

Do you need spacers?

On this table you will find the spacers for your bike. Where your bike is in the following table, just click on the spacer code to be sent back to the selected spacer.

THE SPACERS IN THIS TABLE ARE FOR ORIGINAL AND NOT INCREASED DIAMETER DISCS

 

HONDA SPACER CODE H. spacer H. screw
CBR 600 RR '05-16 - - -
CB 1000 R '08-17 - - -
CBR 1000 RR '04-'05 - - -
CBR 1000 RR '06-'07 105998709 - 60mm
CBR 1000 RR '08-'16 105998709 - 60mm
CBR 1000 RR SP '14-'16 105998709 - 60mm
       
KAWASAKI SPACER CODE H. spacer  H. screw
ZX 6 R '05-16  105998709 - 60mm
 ZX 10 R '04-'07 105998709 - 60mm
ZX 10 R '08-'10  220A06117 8mm  70mm
ZX 10 R '11-'15 (+ ABS)  220A06117 8mm  70mm
       
SUZUKI SPACER CODE H. spacer H. screw
GSX R 600/750 '04-'05  105998709 - 60mm
 GSX R 600/750 '06-'07 220A06117 8mm  70mm
GSX R 600/750 '08-16  220A06117 8mm  70mm
 GSX R 1000 '03-'04 105998709 - 60mm
GSX R 1000 '05-'08  220A06117 8mm 70mm
GSX R 1000 '09-'16  220A02421 10mm 70mm
GSX R 1000/GSX R 1000 R '17 ->  220A02421 10mm 70mm
GSX R 1300 Hayabusa '08-'11  220A02421 10mm 70mm
       
TRIUMPH  SPACER CODE H. spacer H. screw
 Daytona 675 '09-'12 220A02415 7mm  70mm
Speed Triple 1050 '05-'07  220A06117 8mm  70mm
       
YAMAHA  SPACER CODE H. spacer H. screw
YZF R6 '05-'16  220A06115  7mm 70mm
YZF R6 '17->  220A06115  7mm 70mm
YZF R1 '04-'06  220A06115  7mm 70mm
YZF R1, R1 M '15->  220A06115  7mm 70mm 

 

There are currently no product reviews.
motore moto
PROTECT YOUR CARTER WITH gbracing
casco
BROWSE OUR CATALOG
gomme moto
SHIPPING
& DELIVERY