Oil hoses kit Classic Frentubo type 1

Code: 162074B-1

Number of hoses in the package: 1

Note: Oil pipe

The kit is complete with reinforced teflon steel tube with transparent coating and sheath, stainless steel fittings and pins (unless otherwise specified).

Tipo 1:Steel hoses with steel fittings.

Scegliere Fren tubo.

Fren tubo è preceduta dalla propria reputazione nel settore motociclistico. Fornisce i suoi prodotti a team di primo livello nei campionati motoristici ed è scelta dalle più grandi case motociclistiche per il primo equipaggiamento. Non c'è motivo di scegliere altre marche. I tubi freno della Frentubo sono costruiti al 100% in Italia.

L'importanza di un tubo freno in "forma"

In fase di frenata le pompe freno spingono con forza il liquido freni provocando un repentino aumento di pressione all'interno della struttura del tubo, questa azione porta le tubzioni dei freni ad espandersi e gonfiarsi determinando il noiosissimo "effetto polmone" che diminuisce potenza e modulabilità della frenata. Frentubo ha progettato i propri tubi freno per contenere al massimo questo effetto utilizzando le migliori tecnologie disponibili. La tubazione interna è costituita in PTFE (Teflon), resistente al calore e non igroscopico, fungendo da barriera contro l'assorbimento di umidità da parte del liquido freni dot 4 o super dot 4. La parete esterna del tubo è strutturata in treccia d'acciaio inox. Tutto ciò si traduce in una aumentata efficienza e affidabilità della frenata.

Puoi acquistare il fluido freni cliccando qui

Qualità e impegno per la tua moto

Ogni kit è sottoposto a test di alta pressione dalla Fren Tubo prima di essere commercializzato ed essendo realizzato su misura per il cliente, preghiamo di attendere 4-7 giorni lavorativi per la fabbricazione ed il collaudo.

Cosa comprende il KIT

Choise Fren tubo.

Fren tube is preceded by its reputation in the motorcycle industry. It supplies its products to top-level teams in the motorsport championships and is chosen by the biggest motorcycle manufacturers for the original equipment. There is no reason to choose other brands. Frentubo brake hoses are 100% made in Italy.

The importance of a "shaped" brake hose

During braking, the brake pumps force the brake fluid with force, causing a sudden increase in pressure inside the tube structure, this action brings the brake hoses to expand and swell causing the boring "lung effect" which decreases the power and modulation of the braking. Frentubo has designed its brake tubes to minimize this effect using the best available technologies. The internal piping is made of PTFE (Teflon), heat-resistant and non-hygroscopic, acting as a barrier against the absorption of moisture by the dot 4 or super dot 4 brake fluid. The external wall of the tube is structured in stainless steel braid. All this translates into increased efficiency and reliability of braking.

You can buy brake fluid by clicking here

Quality and commitment for your bike

Each kit is subjected to high pressure tests by the Fren Tubo before being marketed and being made to measure for the customer, Please wait 4-7 working days for manufacturing and testing.

What the KIT includes

The Brake Hoses Kit is complete with all the gasket bolts and accessories for assembly and includes both the front pipes and fittings and the rear ones always complete with fittings, bolts and gaskets. TUV and DOT certificates. The package includes the necessary for assembly and, where necessary, instructions for installation. The tube may be required coated in the following colors:

• Grey
• Black
• Red
• White
• Blue
• Yellow
• Green
• Orange

If there are no specific indications, the kit is shipped with an original front brake master cylinder and with a transparent coating as in the picture, the specifications must be sent when ordering, the specifications must be sent at the time of order, changes are not considered sent later.

Technical specifications:

Stainless steel braided hose with outer sheath and steel fittings with ZINC NICKEL treatment (DIN 50021-s standard: 480 hours without the appearance of red rust). Complies with FMVSS 106 standards. Minimum bursting pressure: 827 bar.

Attention: In the event that your motorcycle is fitted with Brembo or Accossato aftermarket radial pumps, it must be indicated in the order notes.

We recommend the use of high quality dot 4 brake fluid such as Brembo, Castrol, Motul verifying the integrity of the bottle seal due to the high hygroscopic power of the brake fluid (Tendency to absorb moisture)that would infect the properties for which it is designed. Dot 5 or Dot 5.1 fluids are not recommended, even if perfectly compatible with Frentubo they are incompatible with the gaskets of most of the brake pumps.

Suitable for: