MAINTENANCE: Lubricate your chain every 300 to 350 miles (480 to 560km) with a quality lubricant such as SAE 80-90 wt. motor oil or aerosol lubricant designed specifically for motorcycle chains. When operating in hot, dry and/or dusty conditions, you may need to lubricate more frequently. Apply a moderate amount so lubricant penetrates between pins, rollers and bushings (fig. 5).
CLEANING: Do not use harsh solvents or chemicals, such as gasoline or benzene. DID recommends using a biodegradable degreaser with a soft (non-wire) bristle brush or clean cloth for removing dirt. Use kerosene (paraffin oil) if necessary, let dry and lubricate immediately within 10 minutes.
CAUTION: Replace chain immediately in the event of contact with battery acid. Immediately clean chains that come in contact with rock salt or salt water. Always lubricate after cleaning (fig. 6).
General Information on Compliance with the European GPSR Regulation
The products included in this supply comply with current regulations on general product safety, in accordance with the European GPSR Regulation.
For detailed information on product compliance, user manual requests, safety data sheets, or any other technical documentation, please contact the manufacturer or importer directly using the following references:
Manufacturer/Importer Contact Information:
Ognibene SpAVia del Tipografo, 640138 Bologna - ItalyTel +39 051 534 225Fax +39 051 535 083
Search by bike
