Kit Strada Logger

 Code: X08MMD020SL

To turn your MX Strada into a logger

If the reception and display of data on the Dash display is no longer sufficient, with the Strada Kit it is possible to expand the possibilities by expanding the dash to a real logger. The Kit consists of Strada Logger, which allows the transformation of any MX Strada into a real logger, capable of recording data ready to be analyzed with Race Studio 3 so as to allow an improvement in terms of performance, to understand if your vehicle has breakdowns or other technical problems and much, much more. Reliable and easy to install.

The Strada Logger is a compact support for SD cards that can be connected to AIM dashboards: MXG 1.2 Strada - MXP Strada - MXS 1.2 Strada to record data during track sessions. Strada Logger can also be connected to loggers: MXG 1.2 - MXP - MXS 1.2

The management is simplified by connecting the module to the logger, the data in this way will be saved simultaneously both in the logger's memory and on the SD (Not included). It does not need any configuration and can be removed both with the engine running and off, during a long stop or during short stops of endurance races. At the end of the session, just remove the SD card, insert it into the PC and download the data with Race Studio 3. The kit supports SD cards up to 32 GB (The card is not included with the kit).

Strada Kit turns a Strada dash into a logger.

STRADA LOGGER

• Max power consumption: 50 mA
• Cable length: 20 cm
• SD Card: up to 32 GB
• Dimension: 55.5x78.3x18 mm
• Wheight: 103 g
• Waterproof: IP65

The kit includes:

• Strada Logger