MXP Strada 6-inch futuristic instrumentation for car

 Code: XA5MXPSTRI010 

Fully configurable pages

The information is easily accessible thanks to the use of page technology, it is possible to create and scroll through the appropriate buttons.

Large high contrast display

The large TFT color display with high contrast allows an always impeccable reading of data and information, the display is also equipped with a light sensor that adjusts the brightness according to the ambient light, making data consultation always clear and immediate in any light condition.

MXP Strada with road icons

This version offers the standard road icons for the indication of high and low lights, direction indicators, oil warning light, water temperature and fuel reserve instead of the programmable LED lights.

Expandability at the highest level

MXP Strada has two digital outputs, which can be managed separately. They can be used independently on analogue, digital or CAN inputs. Through these it is possible to manage external systems, such as activating or deactivating cooling fans or circulation pumps depending on the occurrence or utility. The MXP Strada allows messages to be sent to a CAN line allowing the range of vehicle controls to be extended. Equipped with 2 analogue inputs for mounting special cameras so as to be able to transform the large display into a functional rear view camera. 

Through the CAN-bus, the MXP Strada is expandable with 8 additional modules to maximize your driving experience and adapt to new requirements:

GPS08 Module

• Thanks to this module it is possible through the interface of the supplied software Race studio 3 to download and analyze the lap data to intervene on the engine set-up while improving one's driving technique.

Channel Expansion

• Allows you to add 4 analogue 0-5 Volt channels.

TC Hub

• Allows you to add 4 K thermocouples.

LCU-One CAN

• LCU Wide band lambda controller, equipped with a probe: transmits all information on the Air/Gasoline ratio, lambda probe value and exhaust gas temperature allowing engine tuning.

SmartyCam HD cameras

• The on-board cameras that read the data from the system and automatically superimpose them on the video for an even more precise reading.

Race Studio 3,  the perfect software for your AIM

With the Race studio 3 it is possible:

• Create, modify, delete, import and export configurations with all channels, the drivers of the control unit, the mathematical channels, the display pages, the digital outputs, the alarms, the shift lights and all the desired expansions. It is also possible to manage the maps of all your favorite circuits and compare two laps on the same track by watching the videos recorded by the SmartyCam HD and GP HD cameras.

Features:

6”TFT display, resolution 800x480 pixels, contrast 600:1, ambient light sensor, 5 RGB freely configurable alarms LEDs, 10 integrated freely configurable RGB LEDs shift lights, 3 CAN connections, CAN, RS232, K-Line connection to 1,000+ industry leading ECUs, 8 fully configurable analog inputs, 1 speed digital input, coil RPM input, 1 digital output, anodized aluminum body, metallic pushbuttons, 2 AMP connectors + 1 Binder connector, IP65.

• Display: 6” TFT
• Resolution: 800x480 pixels
• Contrast: 600:1
• Brightness: 700cd/m2 - 1,100 Lumen
• Ambient light sensor: Yes
• Alarm display icons: Yes, freely configurable
• Shift lights: 10 integrated freely configurable RGB LEDs
• Alarm LEDs: 5 integrated freely configurable RGB LEDs
• CAN connections: 3
• ECU connection : CAN, RS232 or K-Line
• ECU compatibility: 1,000+ industry leading ECUs
• Expansion CAN connection: GPS Module, Channel Expansion, Thermocouples expansions,
• Lambda Controller, SmartyCam HD
• Analog inputs: 8 fully configurable, max 1,000 Hz each
• Digital inputs: 1 Speed input, coil RPM input
• Digital outputs: 1 (1 A max)
• Second CAN: Yes
• Body: Anodized Aluminum
• Pushbuttons: Metallic
• Connectors: 2 AMP connectors + 1 Binder connector
• Power consumption: 400 mA
• Dimensions: 189.6 x 106.4 x 24.9 mm
• Weight: 590 g
• Waterproof: IP65

In the box:

MXP, GPS Module with cable, USB cable, Race Studio 3 software.