MXK10 Plug & Play digital instrumentation created for Kawasaki ZX-10R 5th gen

 Code: XA2MXS12A05R0KN

Fully configurable pages

The information is easily accessible thanks to the use of page technology, it is possible to create and scroll through the appropriate buttons.

Large high contrast display

The large TFT color display with high contrast allows an always impeccable reading of data and information, the display is also equipped with a light sensor that adjusts the brightness according to the ambient light, making data consultation always clear and immediate in any light condition.

Configurable alarm signals

It is possible to configure 6 alarm signals by deciding the switching priority, the color, and also the flashing, defining the frequency or leaving the light on steady. It is also possible to associate a message to be displayed on the display corresponding to the relative light. The 6 RGB LEDs are individually configurable by the user, giving the possibility to decide color and mode for each gear change.

Expandability at the highest level

MXK10 has two digital outputs, manageable separately. They can be used independently on analogue, digital or CAN inputs. It is possible through these to manage external systems, such as activating or deactivating cooling fans or circulation pumps depending on the occurrence or utility. The MXK10 allows the sending of messages to a CAN line allowing the expansion of the vehicle's control range. Equipped with 2 analogue inputs for mounting special cameras so as to be able to transform the large display into a functional rear view camera. 

Through the CAN bus, the MXK10 is expandable with 8 additional modules to maximize your driving experience and adapt to new needs that have arisen:

GPS08 Module

• Thanks to this module it is possible through the interface of the supplied software Race studio 3 to download and analyze the lap data to intervene on the engine set-up while improving one's driving technique.

Channel Expansion

• Allows you to add 4 analogue 0-5 Volt channels.

TC Hub

• Allows you to add 4 K thermocouples.

LCU-One CAN

• LCU Wide band lambda controller, equipped with a probe: transmits all information on the Air/Gasoline ratio, lambda probe value and exhaust gas temperature allowing engine tuning.

SmartyCam HD cameras

• The on-board cameras that read the data from the system and automatically superimpose them on the video for an even more precise reading.

Memory Module

• It is a support for SD cards useful for recording data from the AIM logger during track sessions.

Race Studio 3,  the perfect software for your AIM

With the Race studio 3 it is possible:

• Create, modify, delete, import and export configurations with all channels, the drivers of the control unit, the mathematical channels, the display pages, the digital outputs, the alarms, the shift lights and all the desired expansions. It is also possible to manage the maps of all your favorite circuits and compare two laps on the same track by watching the videos recorded by the SmartyCam HD and GP HD cameras.

Features: 

Compact TFT 5 "high contrast display (1.100 lumens), 6 configurable RGB LED alarms, 10 configurable RGB LED shift lights, 2 Motorsport connectors + 1 Binder connector, 3 CAN connections, connection to more than 1,000 ECU market protocols, inertial platform, 8 configurable analogue channels, 4 digital speed channels, 1 RPM channel, 2 digital outputs, fully configurable mathematical channels, Wi-Fi 802.11 connection, IP65

• Display: 5” TFT
• Resolution: 800x480 pixels
• Contrast: 600:1
• Brightness: 700cd/m2 - 1,100 Lumen
• Ambient light sensor: Yes
• Alarm LEDs: 6 RGB freely configurable
• Shift lights: 10 integrated freely configurable RGB LEDs
• CAN connections: 3
• ECU connections: CAN, RS232 or K-Line
• ECU compatibility: + 1,000 industry leading ECUs
• Expansion CAN connection: GPS, Channel Expansion, Thermocouple Expansions, LambdaController, SmartyCam HD
• Analog inputs: 8 fully configurable, max 1,000 Hz each
• Digital inputs: 4 Speed inputs, lap signal, coil RPM input
• Digital outputs: 2 (1 A max each)
• Second CAN: Yes
• Wi-Fi connection: Yes
• Accelerometer: Internal Three-axial ± 5G + Three-axial Gyroscope
• Internal memory: 4 GB
• Body: Anodized Aluminum
• Pushbuttons: Metallic
• Connectors: 2 Motorsport connectors + 1 Binder connector
• Power consumption: 400 mA
• Dimensions: 169.4x97x23 mm
• Weight: 530 g
• Waterproof: IP65

The kit includes:

MXK10, GPS module with cable, USB cable, standard 37-pin wiring, Race Studio 3 software.

Suitable for: