AIM MyChron5S the perfect solution for Kart

 Code: XD1M5SCHT40S

Data acquisition, the most important data visualization and a latest generation GPS make the MyChron5S the most complete data logger conceived for Kart. It is possible to detect and display lap times, split times, engine speed, temperatures, but also position on the acceleration track and many other fundamental parameters for the analysis and consequent improvement of its presatazione. With the MyChron 5 2T version it will be possible to have a second temperature value according to your needs

MyChron5S, equipped with an incredibly powerful GPS

The MyChron5S GPS detects times, intermediates, speed, position on the track and trajectories with extreme precision and reliability compared to the old generation GPS.

An unprecedented data display

A large 268x128 pixel display allows data readability to be always precise and optimal, thanks also to the backlight functionality selectable in 8 color variants. The brightness sensor will adapt the lighting for perfect rendering and immediate data reading.

Choose the best arrangement for your data

The data can be configured, positioned and displayed in pre-configured pages. You can always choose which display to keep useful parameters under control. At the end of the session the data can be easily recalled for a more accurate analysis

5 RGB LEDs to keep everything under control

The five RGB LEDs are fully configurable and it is possible to decide which events and colors activate it. You can configure them to turn on in the event of the best time/split time, to keep the engine revs level under control, or to choose the right moment for changing gear.

Configurable alarm signals

The MyChron5S is equipped with 2 RGB alarm LEDs that can be configured to switch on when a certain threshold of a parameter chosen by the user is exceeded..

Firmware and data update via WI-FI

The MyChron5S eliminates the need for connection with annoying cables, a protected and secure WI-FI connection allows updates and download of the race data. In the case of simultaneous use of multiple systems or multiple PCs (typically in the case of a team), it is also possible to activate data transmission via Wi-Fi between all MyChron5S and all PCs at once: just purchase an access point that will act as a 'bridge' between systems and PCs.

MyChron5S can be powered in three ways:

• From an electrical outlet, using the support supplied with the product.
• From the power outlet, thanks to the special charger: in this way you have the advantage of not having to disconnect the battery from MyChron5S.
• Using the appropriate connection cable. In this case, if desired, the unused lithium battery can be removed: in order not to leave the power supply connectors exposed, the aluminum protection must be applied.

Compatibility with MyChron4 expansions and accessories

LCU-One CAN

• LCU-One Wide band lambda controller, equipped with probe: it transmits all the information on Air/Gas ratio, lambda probe value and exhaust gas temperature allowing the engine to be set up. SmartyCam HD Rev.2.1

SmartyCam HD cameras

• The on-board cameras that read the data from the system and automatically superimpose them on the video for an even more precise reading.

MyChron Expansion

• It is a channel multiplier that allows the control of braking and acceleration, including the throttle valve.

Infrared Temperature Controller

• To connect the pneumatic temperature sensors to MyChron5S.

Data Hub

• The multiplier of CAN connections to interface MyChron5S with the various peripherals.

Sensor

• Temperature, pressure, accelerator and brake position sensors, steering, speed, RPM.

Race Studio 3,  the perfect software for your AIM

With the Race studio 3 it is possible:

Create, modify, delete, import and export configurations with all channels, the drivers of the control unit, the mathematical channels, the display pages, the digital outputs, the alarms, the shift lights and all the desired expansions. It is also possible to manage the maps of all your favorite circuits and compare two laps on the same track by watching the videos recorded by the SmartyCam HD and GP HD cameras.

A nylon frame with fiberglass and metal buttons

The MyChron5S is equipped with a very sturdy frame, resistant to shocks and bad weather. The non-reflective anti-scratch display allows optimal readability in all conditions.

Two temperatures under control

For the most demanding riders MyChron5S 2T allows the control of the fundamental engine temperatures. MyChron5S 2T detects and displays - in addition to RPM and lap times - the data relating to two temperatures, coming from:

Two thermocouples:

• Allow you to keep the fuel mixture under control

Two thermoresistances:

• Measure the engine operating temperature

A thermocouple and a thermoresistance:

• To monitor the basic engine parameters
• GPS: Integrated
• Inertial platform: Included
• Wi-Fi connection: Included
• Display resolution: 268x128 pixel
• Backlight: 8 configurable RGB colors
• Ambient light sensor: Included
• Multifunction LEDs: 5 RGB LEDs*
• Alarms LEDs: 2 configurable
• RPM sampling frequency: 50 Hz
• Body: Glass fiber reinforced Nylon
• Pushbuttons: Metallic
• Battery: Rechargeable Lithium
• Memory: 4 GB
• Dimensions: 137 x 88 x 30 mm
• Weight: 390 g
• Waterproof: IP67

In the Box:

• MyChron5S, battery charger with cable, RPM cable, temperature sensor. Optic/magnetic receiver optional.